Ethernet Ports" > "Interface Xn" Submenu; Table 136: "Networking" > "Ethernet" > "Ethernet Ports" > "Interface Xn - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
7.6.4.4.13 "Ethernet Ports" > "Interface Xn" Submenu
This submenu contains the settings for the selected ETHERNET interface.
Table 136: "Networking" > "Ethernet" > "Ethernet Ports" > "Interface Xn" Submenu
Submenu
0. Back to ...
1. Port
2. Autonegotiation
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Submenu Item / Explanation
Back to the higher-level menu
Set here whether the selected port is to be used.
0. Back to ... Back to the higher-level menu
1. Disabled The port is not used.
2. Enabled The port is used.
Set here whether the Autonegotiation function is
enabled for the selected port.
0. Back to ... Back to the higher-level menu
1. Disabled Autonegotiation is disabled.
2. Enabled Autonegotiation is enabled.
Commissioning 169