WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
3.
Click in the menu bar on Insert > Additional library. The "Open" dialog
window then opens. Select the BusDiag.lib and click on [Open] to add it to
this project.
Figure 164: "Open" dialog window
4.
Click on the "Module" icon in the menu bar.
Figure 165: Module icon in the menu bar; FUP programming language
5.
Press the [F2] button on the keyboard. The "Input Assistant" dialog window
opens. Click on the option "Standard function blocks" and select the
function block DiagGetBusState().
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
PROFIBUS DP-V1 Master
363