Pos : 39.1 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Bedi enel emente/F eldbus koppler/-c ontroll er/Adress wahlsc halter - Übersc hrift 3 @ 4\mod_1239190509819_21.doc x @ 30420 @ 3 @ 1

4.4.2

Address Selection Switch

Pos : 39.2 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Bedi enel emente/F eldbus koppler/-c ontroll er/DIP-Sc halter-Bil d ( 8 ... 1 von oben nac h unten) Bilduntersc hrift: Adres s wahlsc hal ter @ 4\mod_1239180034696_21.doc x @ 30364 @ @ 1

Figure 29: Address Selection Switch (for example setting "0")

Pos : 39.3 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Bedi enel emente/F eldbus koppler/-c ontroll er/Adress wahlsc halter beschr eibung - Allgemein Gerät @ 4\mod_1239190682597_21.doc x @ 30423 @ @ 1

Using the address selection switch, the device can be assigned a fixed IP

address.

The set value corresponds to the last digit of the IP address (host ID). The

complete IP address consists of the base IP address stored in the device (factory

setting: 192.168.1.0) and the host ID set on the address selection switch

The coding of the host ID is bit by bit and begins with address selection switch 1

for bit 0 (LSB) and ends with address selection switch 8 for bit 7 (MSB).

Example:

Basic IP address:

Address selection switch (1 ... 8):

IP address:

The detailed use of the address selection switch in conjunction with other options