Table of Contents
Advertisement
765-4102/0100-0000
Value
3
4
5
6
7
8
9
254
255
10.2.2.3.5 Quality
This shows the Port Quality Info, including information on the validity of the process data
for input and output (separately). The content is binary coded.
Bits of Port Quality Info
Bit 0
Bit 1
Bit 2 to bit 7
10.2.2.3.6 Revision ID
This shows the revision ID of the connected product.
A value of 0 means: no product connected.
All other values must be interpreted as the revision ID of the connected product.
10.2.2.3.7 Baud Rate
If an IO-Link product is connected to the port, its data transmission rate appears here. For
IO-Link, the transmission rate of the communication between the port and a connected
product can have the following values:
• 4.8 kbit/s (COM1)
• 38.4 kbit/s (COM2)
• 230.4 kbit/s (COM3)
If no IO-Link product is connected to the port, the text Not connected appears here.
10.2.2.3.8 Cycle Time
The cycle time of the master is bit-coded as follows:
• Bits 0 ... 5 specify a whole-number multiplier between 0 and 63.
• Bits 6 ... 7 specify the calculation formula to use according to the following table:
Bits 6 ... 7
0
Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Table 43: Possible Values of "State" (Port Status Information)
Port Status
Preoperate
Operate
DI CQ
DO CQ
Reserved
Reserved
Incorrect Cycle Time
Port Power Off
Not Available
Description
0 = input process data valid
1 = input process data invalid
0 = output process data valid
1 = output process data invalid
Reserved
Calculation Formula
Multiplier * 0.1 ms
Commissioning
Description
The product is ready for communi-
cation
The product is communicating
The port is in digital input mode
The port is in digital output mode
Reserved
Reserved
The cycle time according to the con-
figuration does not correspond to
the connected product
The port voltage is switched off
The port is not available
Table 44: Meaning of the Individual Bits
Table 45: Cycle Time of the Master
73
Advertisement
Chapters
Table of Contents
