Password Handling; Baud Rate (Index 380); Data Bits (Index 382); Table 21 Selection Options For Password Protection - WAGO 2789-9080 Product Manual

Fieldbus Description

4.2.4.1 Password Handling

Note
Device must be manually locked!
After the lower-level device is unlocked, it is not automatically relocked. The device lock
must be performed manually.
"Password" Parameter
The parameter is used in big-endian format. Only ASCII characters may be used (e.g., for
password "123," a message with the following hexadecimal values must be sent:
31 32 33).
"Password protection level" Parameter
The "Password protection level" parameter controls the behavior of the lower-level device
in terms of password protection. There are three password levels:
Value
0
1
2
Note
Set the password first!
When parameterizing the password, the parameter "Password" must be set first, after-
wards the parameter "Password Protection Level" must be configured.

4.2.4.2 Baud Rate (Index 380)

Value
4800
9600
19200
38400
57600
115200
230400
560800

4.2.4.3 Data bits (Index 382)

Value
0
1
22 | Version: 1.1.0
Communication Module IO-Link
Table 21: Selection options for password protection
IODD Value
no password
write protection (parameters)
read_write protection (parameters)
IODD Value
4800 baud
9600 baud
19200 baud
38400 baud
57600 baud
115200 baud
230400 baud
560800 baud
IODD Value
0
1
2789-9080
Description
No password protection
Write protection for parameters
Read/write protection for parame-
ters
Table 22: Selection options for baud rate
Table 23: Selection options for data bits
Description
7 bits
8 bits