Subaru 1600 Service Manual page 653

BRAT
Fig. 14-180
• Sedan and Hardtop
1) Removal
1) Remove two mounting bolts at
the front ofrear cushion.
2) lifting the front of rear cushion
slightly and depressing cushion near
the bracket of back rest, move cushion
foreward, and the rear cushion is
removed.
A24-391
Fig. 14-181 Removing rear cushion
3) Remove two mounting bolts at
the bottom of back rest.
-- - I I
BODY
~
f-··--...,
J
'
'-
@I-~IIIII
4) lift back rest along rear bulkhead,
and back rest is removed.
A24-392
Fig. 14-182 Removing back rest
2) Installation
1) Place back rest at its proper
position, and tap it to align the holes
of back rest bracket and of vehicle
body.
2) Install back rest mounting bolts.
14-58
1% ,.
r '
I ,
Torque
NOTE:
I Rear seat
2 Head restraint
3 Rail (Head restraint)
4 Bolt.l; washer assembly
5
Oval
head bolt
A24-248
3 -6 N·m
(0.3 - 0.6 kg-m,
2.2 - 4.3 ft-lb)
Pay attention not to jam the mat
3) Hook the rear of cushion to
bracket of back rest by pushing
cushion rearward while the front of it
lifted slightly.
4) Align the front of rear cushion
with the body. and install it with two
mounting bolts.
Torque
3 - 6 N·m
(0.3 - 0.6 kg-m,
2.2 - 4.3 ft-Ib)
p