Fig. 14-207
2. BRAT
Fig. 14-208
Removal of Glass
1) Move handle down and then up,
and tilt (pop) up glass.
A24-737
Fig. 14-209
BODY
2) Remove handle from bue plate
while pressing on the link of handle
at the spring location.
3) Slide safety catcher knob to
release safety lock.
4) Remove male hinge from female
hinge
while lifting glass.
The glass should be detached along the
arc shape of male hinge.
14-67
View
"AH
1 GlassASSY
2 HaneUe
3 Safety catcher
" Male hinge
S Weatherstrip
6 Ba.
A24-804
5)
Install glass with handle facing up,
then insert male hinge into its groow
on the lower portion of the back
panel. Securely futen the pass with
the holddown band.
6) Observe the following precautions
during installation:
a.
Be
careful not to strike male
hinge
apinst the cu body.
b. Ensure that safety lock and handle
lock operate properly.