Subaru 1600 Service Manual page 78

9) Install pitching stopper as follows:
a. Insert pitching stopper rod into the
bracket on the engine side, and
tighten it at the car body side.
b. Tighten the rear nut on pitching
stopper of the engine side so that
the specified clearance exists be-
tween rubber cushion and washer.
,---
Specified clearance
MT
0.8- 1.2 mm
(0.031 - 0.047 in)
L T
1.8 - 2.2 mm
(0.071 - 0.087 in)
c. Attach a wrench to the rear nut on
pitching stopper of the engine side
to prevent it from turning, and
tighten the front nut securely.
Torque
NOTE:
10-18N·m
(1.0 - 1.8 kg-m,
7 - 13 ft-Ib)
Always make a precise adjustment of
pitching stopper to prevent engine
from vibrating during operation.
A4-113
Fig. 3-55 Installing pitching stopper
10) Attach supporter of spare wheel
& tire.
11) Connect cables as before.
a. Connect clutch cable to release fork
with free play.
Free play 2 3 mm (0.08 - 0.12 inl
Full stroke
17 - 18 mm 10.61- 0.11 in)
( ,
{ 1 Lock nut
@
2 Adjusting nut
. 3 Release fork
Fig. 3-56 Adjusting clutch
release
fork
ENGINE
b. (Vehicle with Hill-holder) Connect
P.C.V. cable, and adjust Hill·holder
system. (Refer to Chapter
"Brakes" .)
Fig. 3·57
c. Connect accelerator cable, and
adjust its tension by adjusting nuts.
NOTE:
After making the accelerator cable
adjustment, depress the accelerator
pedal to ensure that the throttle valve
fully opens.
• Hitachi carburetor
Accelerator cable
A4·247
• COW carburetor
A4·248
Fig. 3-58 Installing accelerator cable.
12) (Vehicle with power steering)
Install bracket, oil pump ASSY and oil
pump belt. After adjusting the belt
tension (refer to Chapter "Steering
System"). tighten lock bolt and attach
idler cap.
3-41
Torque
Nut A
44-54N·m
(one)
(4.5 - 5.5 kg-m.
33 - 40 ft-Ib)
Bolt B
44-54N·m
(two)
(4.5 - 5.5 kg.m,
33 - 40 ft·lb)
Bolt C
25 - 34N'm
(three)
(2.5 - 3.5 kg.m,
18 - 25 ft-Ib)
BoltD
20- 29 N·m
(one)
( 2 - 3 kg-m.
14 - 22 ft-Ib)
A3-20l
AS'581
Fig.3·59 Fitting bolts and nuts
13) Install radiator on the car body,
and connect hoses and electric wiring.
Torque
10-18N'm -
( 1.0 - 1.8 kg·m,
7 - 13 ft·lb)