Subaru 1600 Service Manual page 99

NOTE:
a. Apply liquid gasket (Three Bond
1201
-PIN
004403008, or equiv-
alent) on the thread.
b. Install thermo valve with its pipe
oudet facing outside.
b. Stay
&
clip, clip and actuator ASSY
(A/C only).
c. Solenoid valve
I,
bracket and pro-
tector stay.
d. Thennosensor.
NOTE:
Be careful not to bend the terminal.
e. Accelerator cable bracket.
f. P.C.V. valve.
Torque
23 - 26 N'm
(2.3 - 2.7 kg-m,
17 - 20 ft-lb)
®
.: Except 49 states 4WD & 4WD-
4WJ).A T and Canada
Fig. 3-130
3) Install carburetor with two gaskets
and an insulator, and connect hoses.
4) Install E.G.R. valve with gasket
and connector clamp, and connect
hose.
ENGINE
NOTE:
Apply liquid gasket (Fuji Bond C or
equivalent) on the thread.
g. Thenno vacuum valve
I.
Torque
23 - 26 N·m
(2.3 - 2.7 kg-m,
17 - 20 ft-Ib)
NOTE:
Install thermo valve with its pipe
outlet facing fOlWard.
h. Vacuum pipe CP with carburetor
protector
3,
and vacuum hoses.
i. Control air cleaner, P.C.V. hose,
duty solenoid valves, carburetor
protector
2
and hoses.
j.
Heater hose and purge hose.
I Thermo vacuum valve 11
2 Thermostat cover
3 Solenoid valve bracket
4 Protector stay
• 5 Solenoid valve I
6
7
8
9
·10
·11
·12
Thermosensor
PCV valve
Thermo vacuum valve I
Vacuum pipe CP
Carburetor protector 3
Duty solenoid valve
Carburetor protector 2
1 EGR valve
2 Connector clamp
Fig.
3-131
3-62
AS·S88
AS·S89
5) Attach electric wmng harness,
connect electric connectors, and then
clip harness.
2) CoW Carburetor Type
1)
Install thennostat and thermostat
cover with new gasket.
NOTE:
Install it with the jiggle pin upward.
2)
Install the following parts.
a. Stay & clip.
b. Clip.
c. Gasket, thennostat cover, solenoid
valve I and bracket, and connect
hose.
d. Thennosensor.
NOTE:
Be careful not to bend the terminal.
e. P.C.V. valve.
Torque
NOTE:
23 26 N'm
(2.3 2.7 kg-m,
17 20 ft-Ib)
Apply liquid gasket (Fuji Bond C or
its equivalent) on the thread.
f. Thenno vacuum valve
I.
Torque
NOTE:
23 26 N·m
(2.3 2.7 kg-m,
17 20 ft-Ib)
Install the valve with its pipe facing
outside.
g. Vacuum pipe CP and vacuum hoses.