Subaru 1600 Service Manual page 786

ELECTRICAL SYSTEM
2.
GLmodel
Pointer will not operate.
•
Po in ter remains in high posi-
Fuel gauge (meter) and fuel gauge (meter)
If::
tion.
urnt are not properly conditioned.
•
Pointer remains in low posi·
tion.
Inaccurate indication.
Turn on ignition switch.
Determine whether l2V
Instrumen t panel harness is
.---
appears at #5 terminal on
No
defective.
back of meter.
4
Replace.
,
No
Yes
Check
thermometer for
No
Yes
Determine if fuse #12
I
1
I
normal operation.
(15 A) in fuse box is blown.
l
Fuse is blown.
[ 1
Replace fuse (15 A).
Yes
Remove connector from fuel unit.
Connect resistor (70) to black/
No
Determine if 12V appears
Check if 12V appears at #8
yellow lead on harness side and
at fuel unit black/yellow
No
terminal (black/yellow) of
to ground, and see if meter points
lead after disconnecting it
12·P connector on back of
at 1 (F).
from the unit.
meter.
Yes
Yes No
Yes
I
Thermometer is defective.
Fuel unit is defective.
Fuel meter is defective.
--,
Replace fuel unit. Replace fuel meter.
Replace.
Harness wiring is defective.
-
(0.5 black/yellow lead).
Repair.
16-123