Subaru 1600 Service Manual page 543

12·2. Cable
1. Clutch Cable
Tightening torque N·m (kg-m. ft-Ib)
T: 5.4 - 9.3 (0.55 - 0.95, 4.0 - 6.9)
Brake booster
(Master-Vac)
Insert outer cable end into the
groove completely
/I
Fig. 12-13
, I'
PEDAL AND CABLE
1
2
3 Clamp
SUBARU 1600
12-6
NOTE:
Apply grease to contact point of
adjusting nut and release fork.
Free play:
2-3mm
(0.08 - 0.12 in)
1 Locknut
Release fork
@;('"
~H
(Y---'
Stroke: 17mm
(0.67 in)
2 Clutch cable adjusting nut
3 Clutch cable assembly
4 Clamp
5 Boot
NOTE:
a. When installing pedal and bush,
clean up inside of bore of them and
apply grease.
b. Apply grease to connecting portion
of clutch cable and pedal.
c. Make sure that outer end of clutch
cable and two washers are inserted
into groove of pedal bracket com·
pletely.
d. Make sure that one end of cable
clamp is engaged with slit of pedal
bracket firmly.
A20-094