Subaru 1600 Service Manual page 627

• Inner Remote ASSY
1) Detach trim panel and sealing
~~iVCr.
2)
Disconnect two rods from door
latch.
fig. 14·100 Rf/movlng
SCfflW
A24·4ea
Fig. 14·101 Df/rlChlng rod hold"
3)
Remove Inner remote ASSY.
A24·a,a
Fig. 14·102
4)
Installation can be carried out in
the reverse order of removal.
• Door Latch and Key Lock
1) Detach trim panel and sealing
cover.
2)
Close door glass all the way.
3)
Separate remote ASSY from door
latch.
1'1.,,11 • • ,
BODY
4) Disconnect key lock ASSY from
door latch rod.
A24·a17
Fig. 14·103 Disconnecting key lock
from rod
5) Remove screws, and take out door
latch through the lower work hole.
A24·a18
Fig. 14·104 Removing latch
6) Pull out retainer spring, and take
out key lock from the outside.
A24·820
Fig. 14· 706 Pulling out retainer spring
7)
Installation can be carried out In
the reverse order of removal.
Torque
Latch Installing
screws
4-6N·m
(0.4 - 0.6 kg·m,
2.9 - 4.3
ft·lb)
14-32
NOTE:
a. After installation, make lure that
locking mechanilm operatel pro·
perly.
b. Check the following items.
• each movement of locking system .
• Lubrication to each sliding por·
tion .
• Outer Handle
I)
Remove trim panel and sealing
cover.
2)
Remove door glass, and discon·
nect outer handle rod and door latch
rod.
3)
Detach outer handle from the
outside.
A24·132
Fig. 14·706
4)
Installation can be carried out in
the reverse order of removal.
NOTE:
Adjust free play batween adjust nut
and door latch laver into 0.& to 1.0 mm
(0.020 to 0.038 in).
Au·a"
Fig. 14·101 Ff'H play of adjust nut