Subaru 1600 Service Manual page 739

Masking thin
film
Broken position
composition
A25-398
Fig.
15-248
Depositing composition
4) Dry out the deposited portion.
S) Inspect the repaired wire for
continuity.
Key warning switch
Fig. 15-249
ELECTRICAL SYSTEM
5. Seat Belt " Key
Warning Chime
Seat belt & key warning chime partici-
pates in both seat belt warning system
(aU models) and key warning system
(except 4WD).
1) Seat belt warning system
Fasten seat belt warning light in com-
bination meter turns on for approx.
six (6) seconds after turning ignition-
starter switch to ON position.
Also, only when driver's seat belt is
not fastened, the chime will sound
about four (4) times.
2) Key warning system (except 4WD)
The chime will sound while door is
opened with the key plate inserted in
ignition-starter switch.
I,
~~
~,
Door switch
Timer
15-76
\
Key plate position in
ignition-starter switch
(START), ON
ACC,OFF,
LOCK
Hatchback
Zone A Zone A
STD
Others
(except
Zone A
ZoneB
4WD)
Zone A: The chime will sound while only
front driver's door is open.
Zone B: The chime will sound whenever
front door, rear door or rear gate
is opened.
Room
light
Seat belt switch
Chime
A25-815