Subaru 1600 Service Manual page 286

MANUAL TRANSMISSION AND DIFFERENTIAL
c. Install plate to body.
Torque
\
20
29 N'm
(2.0 - 3.0 kg-m,
14 - 22 ft-Ib)
d. Pull out 8 mm (0.31 in) dia. pin.
II) Make sure that gearshift lever and
drive selector lever can be operated
smoothly in their full stroke.
12) Install rod cover etc.
NOTE:
For dual-range, confirm that the
distance between grip lower surface of
drive selector lever and rod cover
upper surface is approx. 40 mm
(1.57 in). If without specification,
readjust plate position. [Readjust plate
position without the pin [8 mm (0.31
in) dia.] in case of need.]
6-69
Fig. 6-240
13) Install exhaust system.