FUEL SYSTEM
4·10. Vapor Separator
(Engine compartment I
Front
t
To carburetor
To fuel tank
A21·189
Fig. 4·103
4-36
1. Removal
and Installation
1) Release
clips,
and disconnect
hoses from vapor separator.
2) Pull out vapor separator from
holder.
3) Installation can be carried out in
the reverse order of removal.
2. Inspection
I) Inspect vapor separator if the
foreign matter exists in it. Replace it
if it will interfere with running.
2) If water is found in it, shake it
with its outlet downward, and water
will be removed.
NOTE:
The vapor separator is a cartridge type,
so it should not be disassembled.