Subaru 1600 Service Manual page 247

MANUAL TRANSMISSION AND DIFFERENTIAL
2) l4-speed
1
Remove the following parts with
Remover (899864100) and Retainer
(899714110).
• Ball bearing
• 3rd4th driven gear
Retainer
2 Remover
(899714110) (899864100)
Fig. 6-52
3)
I
5-speed
I
Remove the following parts.
• Insert stopper plate
• Insert guide
• Synchronizer hub
• 5th driven gear
• Needle bearing
4)
1
5-speed
1
Remove the following parts with
Remover (899864100) and Retainer
(899714110).
• 5 th needle bearing race
• 5th driven gear thrust plate
• Ball bearing
• 3rd-4th driven gear
1 Remover
(899864100)
2 Retainer
(899714110)
Fig. 6-53
A12·202
5)
1
4WD & 4WD Dual-range
I
Remove the following parts with
Remover (899864100) and Retainer
(899714110).
• Transfer needle bearing race
• Drive pinion collar
• Washer
• Ball bearing
• 3rd-4th driven gear
1 Remover (899864100)
2
Race
3 Collar
4 Washer
5 Ball bearing (25 )( 70 )( 30)
6 Retainer (899714110)
Fig.
6·54
A12·222
6) 2nd driven gear and needle bearing
by hand.
7) Remove the following parts with
Retainer (899714110).
• 1st driven gear
• 1st-2nd needle bearing race
• 1st-2nd synchronizer hub
NOTE:
Take out key before removing needle
bearing race.
A12'()30
Fig.
6-55
8) Remove the following parts with
Retainer II (899858600) for 1600 or
Replacer (498517000) for 1800.
• 1st-2nd needle bearing race
• 1st driven gear thrust plate
6-30
Retainer II
(899858600)
2
Race
Fig. 6·56
3) Differential Assembly
A12·031
1) R.H. and L.H. snap rings, and axle
drive shafts.
NOTE:
Take care not to interchange R.H. and
L.H. axle drive shafts.
2) Crown gear
11600
I
L Straighten crown gear lock washer.
2. 8 bolts and crown gear.
11800
1
10 bolts and crown gear.
3) Drive out straight pin toward
crown gear with Remover (899904-
100).
Remover
(899904100)
~~
(\
~
y,rq~
' / v
A 12'()36
Fig.
6-57
4) Differential pinion shaft, differen-
tial pinions, differential side gears and
washers.