Subaru 1600 Service Manual page 366

AUTOMATIC TRANSMISSION AND DIFFERENTIAL
19) Route the speedometer cable
underneath the pitching stopper with
the battery cable, and clamp it on the
pitching stopper.
20) Make all necessary wiring connec·
tions.
NOTE:
Be sure to connect the ground cable.
21) Connect the diaphragm vacuum
hose and oil cooler hose.
A4·115
Fig.
7·191
Connecting vacuum hose
A4·118
Fig.
7·192
Connecting oil cooler hose
7-71
22) Connect the battery ground cable.
23) Check the transmission oil level
and, if necessary, add oil.
24) Start the engine and add ATF up
to the specified level.
25) Start engine. Check exhaust pipe
connections to ensure there is no gas
leakage.
26) Check the operation of clutch for
smooth engagement and disengage·
ment.
27) Check the operation of shift lever
or select lever for smooth gearshifting.
28) After all work has been com·
pleted, install spare tire.
_ .-.J