Subaru 1600 Service Manual page 643

I)
Remove wiper arms, and open
front hood.
2) Remove five installing screws.
3) Remove cowl panel by shifting it
forward to pull its flange portion out
of front panel.
NOTE:
When removing cowl panel, be careful
not to damage painted surface of
body.
BODY
Fig. 14-157
A24·350
4) Install (new) cowl panel in posi-
tion. 5) Install wiper arms as before.
7. Fuel Flap and Key Lock
5
®
Fig. 14-158
8. Mud Guard
Fig. 14-159 Mud guard
.I"f·'~~" .•• ,.~", ........ _ .. '
.1 It ,,1 «1
r.
II
1
1 Flap
2 Clip
3 Key lock
4 Screw
5 Hinge
6 Striker
1
2
3
4
5
6
14-48
A24-682
Mudguard
Clip
Screw
Washer
Nut
Clip
A24-683
: I
~)
Open fuel flap and remove clip at
behind of flap.
2) Pull out key lock, and attach new
one with clip.
3) Replace flap by removing/tighten-
ing screws attaching flap to body at
hinge.
NOTE:
Position hinge so that flap is attached
to body properly.
1) Jack up the vehicle at its front, set
rigid rack, and remove front wheels.
2) Remove all screws and clips fixing
mud guard excluding clips inserted in
the flange of fender, shift mud guard
to the inside of the vehicle, and re-
move mud guard by pulling out clips
from the fender flange.
3) Install (new) mud guard in posi-
tion.
NOTE:
Renew all clips.
4) Install front tires and wheels as
before.