Subaru 1600 Service Manual page 227

MANUAL TRANSMISSION AND DIFFERENTIAL
No. Parts
2 Clutch cover CP
3
4
Clutch release bearing.
NO'rE:
Since this bearing is
g ............. and is of a
non-lubrication type, do
not wash with ... Iine or
any solVlnt when _rvic·
i .. the dutch.
Clutch release fork.
Inspection
Visually check for the following items
without disassembling.
I) Loose thrust rivet
CD.
2) Damaged or worn bearing contact
area at center of diaphragm spring
@.
3) Damaged or worn disc contact
surface of pressure plate
@.
4) Loose strap plate setting bolt
@.
5) Worn diaphragm sliding surface
@.
A12-437
Fig.
64
(1) Smoothness of rotation
Rotate bearing applying pressure in
thrust direction.
(2) Wear and damage of holder sur-
face contacting with fork
Check fork pivot portion and the
point of contact with holder for wear.
6-10
Corrective action
Repair or replace.
Repair or replace.
Repair or replace.
I
Replacing of clutch release bearing
I
1) Remove bearing out of holder.
2) Press bearing.
NOTE:
Do not depress outer race.
I Press (899754112)
2 Sealing (Clutch release)
3 Holder (Release bealing)
Fig.
6·5
Installing clutch
reI_
bfJsring
Repair or replace.