Subaru 1600 Service Manual page 440

\
"---Fin
BRAKES
A17-300
Fig. 10-1 Ventilated disc rotor
Front brake
(Disc type)
ITEM
Pad thickness (including back metal)
Disc thickness Solid disc
Ventilated disc
Disc run-out
STANDARD
15 mm (0.59 in)
12.5 mm (0.492 in)
18mm(0.71 in)
--- - ----------
-~-------
l
SERVICE LIMIT
7.5 mm (0.295 in)
10 mm (0.39 in)
15.5 mm (0.610 in)
O. IO mm (0.0039 in)
~-------+---------------------------+-------------~----~- - - - - - 1
Rear brake
(Drum type)
Inside diameter
Lining thickness
t--------------- --------------- -- - - - - - - - - - - - - - - - -
Brake booster
(Master-Vac)
Brake fluid pressure without engine running
180 mm (7.09 in)
5 mm (0.20 in)
182 mm (7.17 in)
1.5 mm (0.059 in)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
At brake pedal force 147 N (15 kg, 33 Ib):
392 kPa (4 kg/em
2
,
57 psi)
A t brake pedal force 294 N (30 kg, 66 Ib):
2,550 kPa (26 kg/cm
2
,
370 psi)
1------- - - - - ---- - ---- --- - ------------- - ----------- ----------- --- ------------- - - - - - - ------------------------
Brake fluid pressure with engine running and
vacuum at 66.7 kPa (500 mmHg, 19.69 inHg)
At brake pedal force 147 N (15 kg, 33 lb):
3,432 kPa (35 kg/cm
2
,
498 psi)
At brake pedal force 294 N (30 kg, 66 Ib):
152.4 mm (6 in): 5,884 kPa
(60 kg/ cm
2
,
853 psi)
177.8 mm (7 in): 6,865 kPa
(70 kg/cm
2
,
995 psi)
1--------+------------------ -- --- ----------------
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1
Parking brake Lever stroke
3 to 4 notches/245 N (25 kg, 55 lb)
1 - - - - - - - + - - - - - - - - - - - - - - - - - - - - - - - - - - - --------
- - - - - - - - - - - - - - - - - - - - - j
Hill-holder
Adjusting shim
Thickness
Part Number
' - - - - - - - - - - - -
' - - - - - -
- - - - - - - - -- --------- -------
------------
• Recommended Brake Fluid
FMVSS No. 116, DOTJ
NOTE:
0.6 mm (0.024 in)
(One shim increases an angle of approx. 0.5
0
.)
725807000
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - '
a. Avoid mixing brake fluid of different brands to prevent the fluid performance from degrading.
b. When brake fluid is supplemented, be careful not to allow any dust into the reservoir.
c. Use fresh 00T3 brake fluid when replacing or refilling the fluid.
10-3