Subaru 1600 Service Manual page 79

A4-100
Fig. 3-60
a. Ground wiring of radiator
b. Connectors for thennoswitch and
fan motor
c. Inlet and outlet hoses to radiator
d. (AT only) Cooler hoses to radiator
e. Inlet and outlet hoses to heater unit
Fig.
3-61
f. Then, fill radiator with SUBARU
genuine coolant to the specified
level.
14) Connect electric wiring as before.
a. Two multiple connectors for engine
wiring harness
1 Harness connector
2 Harness connector for auto-choke,
and carburetor selection (C-W)
A4-245
Fig.
3-62
b. High tension cords
c. Connectors for alternator
NOTE:
(Vehicle with power steering) Securely
fit cord supporter onto blow-by hose
paint marking and high tension cord.
ENGINE
15) Connect hoses as before.
a. (AT) Vacuum hose to vacuum pipe
for kick-down solenoid
1 Vacuum hose-
2 Vacuum
pipe
Fig. 3-63
A4-188
b. Vacuum hose to intake manifold
for brake booster (Master-vac)
\
A4-187
Fig.
3-64
Connecting master-vac
vacuum hose
c. Vacuum hose, carburetor vent hose
and purge hose to pipe complete
1 Vacuum hose
2 Carburetor vent hose
3 Pwgehose
Fig.
3-65
Connecting hoses
A4-186
d. Fuel delivery hose and fuel return
hose to carburetor
3-42
I Fuel delivery hose
2 Fuel return hose
A4-185
Fig.
3-66
Connecting fuel hoses
\6) Attach air cleaner onto carburetor
and connect the following hoses.
CD
Air intake hose
®
P.C.V. hose
@
P.C.V. vacuum hose
@
A.T.C. vacuum hose
@
Vacuum hose to thermo vacuum
valve II (Hitachi carburetor) or
thermo vacuum valve III (C-W
carburetor)
®
Vacuum hose to thermo vacuum
valve I
rJ)
Hose to A.S.V.
Connecting hoses
Then, tighten bolts and wing nuts
securely.
17) Put hoses onto stay, and hold
them with hose clamp.
CD
Vacuum hose
®
Carburetor vent hose
@
Fuel delivery hose
@
Fuel return hose
@
Purge hose
Fig.
3-68
A4-181