Subaru 1600 Service Manual page 650

14· 7. Seat and Belt
1. Front Seats
1 Backrest assembly
2
Cushion assembly
3 Slide
rail assembly
4 Hinge assembly
5
Hillle cover
6 Bushing
7 Hinge knob
8 Bolt
9 Link
10 Wire A
11 Wire B
12
Helper spring
13 Spring
14 Head rest
15 Backrest frame
16 Lumbar knob
17 Cushion frame
BODY
GL & GLF models
l----@
CIt
I
Tightening torque N·m (kg-m, ft-Ibl
T: 13 - 23 (1.3 - 2.3, 9
-171
A24-749
Fig. 14-177 Component parts of front seats
1) Removal
1) Slide front seat to the rearmost
position.
2) Remove two installing bolts at the
front side.
3) Slide front seat to the foremost
position.
4) Remove two installing bolts at the
rear side.
5) Remount both front seats, and
detach slide rails. For passenger's seat
of Hatchback (except STD) and
Hardtop, detach walk-in helper spring
from slide rails.
2) Installation
1) Set both inner and outer rails of
front seat at the, rearmost position
onto front seat.
2) Mount front seat on the body.
3) Temporarily ftx front bolts.
4) Slide front seat to the foremost
position.
14-55
5) Install and tighten rear bolts to
the specifted torque.
Torque
Front and
rear bolts
13 - 23 N·m
(1.3 - 2.3 kg-m,
9-17ft-Ib)
6) Slide front seat to the rearmost
position, and tighten two bolts to the
specifted torque.
7) Hook walk-in helper spring onto
slide rails.