Adjusting The Position Of The Feeding Web Solenoid (Sl2); Points To Note About The Position Of The Fixing Thermal Switch - Canon iR C6800 Series Service Manual

12.6.7 Adjusting the
Position of the Feeding
Web Solenoid (SL2)
Pull on the solenoid [1], and tighten the screw [4]
while making sure that the lever [2] is in firm contact
with the plate at a specific point [3].
[2]
[3]
F-12-77
12.6.8 Points to Note
About the Position of the
Fixing Thermal Switch
After mounting the thermal switch, make sure of
the following:
The surface of the thermal switch [1] must be parallel
to the fixing roller. (Check to be sure by shining the
thermal switch with a pen light.) Otherwise, re mount
it.
[1]
F-12-78
0004-2616
[1]
[4]
0004-5056
OK NG NG NG
F-12-79
12.6.9 Points to Note When
Mounting the Shift
Thermal Switch
After mounting the thermal switch (before
mounting the inlet guide), check to make sure o the
following:
The surface of the thermal switch [1] must be parallel
to the pressure roller. (Be sure to check it by shining
the thermal switch by a pen light.) if not, re mount it.
[1]
F-12-80
OK NG NG NG
F-12-81
Chapter 12
NG
0004-5058
NG
12-39