Canon iR C6800 Series Service Manual page 987

Hide thumbs Also See for iR C6800 Series:

Table of Contents

there is a saddle butting error

there is an error in the saddle connector

there is an error in saddle stitching

there is a hard disk error

there is a shortage of image memory (SDARM)

there is an error in the image memory battery

there is an error on the hard disk

there is a fax board error

there is an external controller error

there is an IPC initialization error

there is an IPC communication error

there is an error in the communication between ADF and reader

there is a finisher communication error

there is an error in the communication with the NE controller

there is an error in the communication with the coin vendor/card reader

there is a PDL error

there is a UFR board error

there is a reader communication error

there is a printer communication error

there is an Ethernet board error

there is a DDI communication error

there is a language file/boot ROM error

there is TokenRing board error

the accessories board is of the wrong type

there is an error in the ASIC for image processing or memory control; or, there is an error in the

ASIC for communication control

an interlock 24V off state has been identified for the fixing unit; with the door closed, the interlock

24V detection signal is off for 500 msec continuously

there is a fan error (of any type)

the fixing heat exhaust fan is identified as being closed; or, there is an error in the fan

there is an error in the process unit cooling fan

there is an error in the primary charging suction/exhaust fan

Chapters

Table of Contents