Intermediate Transfer Unit - Canon iR C6800 Series Service Manual

Chapter 7
7.11.26.9 Removing the ITB
Cleaner End Scraper
1) Detach the 2 end scrapers [1] by peeling off the 2
strips of double sided tape.
[1]
F-7-771
Points to Note When Mounting the End Scraper
Clean the area from where you have detached the end
scraper with alcohol so that adhesive from the double
sided tape will not remain.
7.11.26.10 Mounting the ITB
Cleaner End Scraper
Peel the 2 strips of double sided tape from the end
scraper [1]; then, attach the 2 end scrapers [1] by
aligning their edges against the ends of the ITB
cleaner plate.
[1]
F-7-772
Points to Note When Mounting the End Scraper
Before starting the work, be sure to clean the area with
alcohol so that no adhesive will remain.
7-214
0005-9394
0005-9395
[1]

7.11.27 Intermediate Transfer Unit

7.11.27.1 Removing the Right
Cover (upper)
1) Remove the 2 screws [1], and detach the right cover
(upper) [2].
[1]
F-7-773
7.11.27.2 Releasing the Front
Cover
1) Open the front cover.
2) While pulling on the grip [1], fully open the manual
feed cover [2] to the front.
[1]
F-7-774
0003-8261
[2]
0003-2484
[2]