Canon iR C6800 Series Service Manual page 1174

Chapter 15
15.5.1.1.10 <KEY>
Settings
Method of operation
15.5.1.1.11 <INISET Y>
Method of operatoin
note
15-110
T-15-172
Use it to set the control key function.
0: do not recognize control key. [at time of shipment/after RAM initialization: 0]
1: recognize control key function.
1) Make the following selections, and enter '1': COPIER>INSTALL>KEY.
2) Turn off and then on the main power switch (so that the control key function will
be recognized).
T-15-173
Use it to set up the Y color developing assemblies for the first time.
1) Select the item to highlight, and press the OK key.
the machine will start operation.
the machine will start a countdown.
2) See that 'OK' appears, indicating that the operation is over.
The series of operations needed to initialize the Y/M/C color developing
assembly will be executed at a time:
power control offset adjustment
EPC control
primary transfer ATVC
ITB cleaning
secondary transfer power supply, idle rotation
toner stirring
optical ATR initialization
patch initialization
0001-0235
0002-8517