Adjusting The Position Of The Duplexing Unit Feeding Roller Solenoid (Sl13); Attaching The Timing Belt For The Duplexing Unit Stacking Assembly Paper Guide Plate - Canon CLC5000 Service Manual

CHAPTER 5 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
2.7.17 Adjusting the Position of the Duplexing Unit Feeding Roller Solenoid
(SL13)
Let the feeding roller drop to the bottom
of the duplex feeding assembly on its own
weight.
At this time, fix the solenoid [3] so that
the end-to-end distance between the lever
[1] and the arm [2] is 1.5 ±0.5 mm when
the plunger of the solenoid is pushed.
2.7.18 Attaching the Timing Belt for the Duplexing Unit Stacking Assembly
Paper Guide Plate
Install the gear [1] with the paper guide
plate fully open.
Install the timing belt [3] to the gear 1
and the pulley [2].
5-42
COPYRIGHT © 2001 CANON INC.
[2]
1.5±0.5mm
[1]
[3]
F05-207-19
[1]
F05-207-20
2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
[3]
[2]