Canon iR C6800 Series Service Manual page 1249

<FTPTXPN>
Range of
Setting
<PRN FLG>
Attention
settings range
<SCN FLG>
Attention
settings range
T-15-343
Use it to select a name for the target SEND port (FTP).
0 through 65535 (16 bit) [at time of shipment/after RAM initialization: 21]
T-15-344
Selecting an Image Area Flag (for PDL images)
In the event that the controller fails to compress a PDL image at a
specific rate of compression, image processing will be performed
according to the image area flag selected in this mode item.
The new setting will not be valid until the power switch is turned off
and then on.
0: use high number screen, gray compensation LUT (default)
1: use error diffusion, gray compensation LUT
2: use high number screen, normal LUT
at time of shipment/upon RAM initialization: 0
T-15-345
Use it to select an image area flag (for copy image).
If compression at a specific rate fails on the controller over a scan
image, image processing will be executed according to the image
flag selected in this mode.
The new setting will not be valid until the power switch has been
turned off and then on.
0: text
1: screened photo image
2: printed photo image
at time of shipment/upon RAM initialization: 0
Chapter 15
0001-0510
0005-6751
0005-6753
15-185