Chapter 7
3) If there is any toner [3] on the surface of the
intermediate transfer belt, dry wipe it with lint free
paper.
[3]
F-7-986
When you remove the transfer cleaner drive
assembly, the ITB cleaning blade [1] is likely to come
into contact with the intermediate transfer belt by the
work of a spring, causing toner [2] to deposit on the
belt surface in the form of lines. The toner can then be
forced against the photosensitive drum by the primary
transfer assembly, thus affecting the photosensitive
drum cleaning blade [3].
[2]
[1]
F-7-987
7-258
[3]
7.11.36.8 Removing the ITB
Cleaning Unit
1) Remove the 2 screws [1]; then, slide the ITB
cleaning unit [2] in the direction of the arrow to
detach.
[1]
F-7-988
7.11.36.9 Removing the Patch
Image Reading Unit
1) Shift the arm [1] shown in the figure to lock it in
place; thus releasing the roller (both front and rear).
[1]
F-7-989
0003-2602
[2]
[1]
0003-9014