Ending Service Mode - Canon iR C6800 Series Service Manual

15.1.3 Ending Service Mode

A press on the Reset key will bring back the Service Mode Initial screen.
Another press on the Reset key will end service mode, and bring back the User screen (standard screen).
If you used service mode (ADJUST, FUNCTION, OPTION), be sure to turn off and then on the main power
switch after ending service mode.
15.1.4 Back Up
At time of shipment from the factory, all machines are adjusted individually, and adjustment values are recorded in
their respective service labels.
If you have replaced the reader controller PCB or the DC controller PCB, or if you have initialized the RAM, the
adjustment values (for ADJUST and OPTION) will return to their default settings. If there has been any change in a
service mode item, be sure to update its setting indicated on the service label. As necessary, make use of the space
in the service label (as when recording an item not found on the label).
Service Label for the Reader Controller PCB (behind the front cover [1] of the reader unit)
Service Label [1] for the Main Controller PCB/DC controller PCB (behind the front cover of the printer unit)
[1]
F-15-4
[1]
F-15-5
Chapter 15
0000-9785
0005-6296
15-3