Docst; La Speed - Canon iR C6800 Series Service Manual

Chapter 15
15.4.1.14.7 <WT FL LM>
Use it to set a threshold for issuing an alert when the waste toner box is becoming full.
Use it to set a threshold for detection of a waste toner box error.
Use it to set a threshold referred to when issuing a pre alert message in relation to the amount
of waste toner in the waste toner box (intended for the user).
Use it to set a value referred to when issuing an alert on the User screen.
setting: (number 0: 80000 image
of prints) 1: 140000 image
2: 210000 image
3: 320000 image
4: 460000 image
estimates at a color ratio of 10% and image duty of 5%.
varies depending on the color ratio/image duty.
at time of shipment: factory adjustment value
upon RAM initialization: 2
15.4.2 FEEDER
15.4.2.1 <DOCST>
Method of
adjustment
Range of
adjustment
15.4.2.2 <LA SPEED>
Method of
adjustment
Range of
adjustment
15-90
Adjusting the Original Image Leading Edge
A higher setting will delay the image leading edge timing.
50 to 50 (unit: 0.1mm) [at time of shipment/after RAM
initialization: 0]
Adjusting the document feeding speed at the time of stream reading from the feeder
The speed becomes faster (image is reduced) by increasing setting value.
30 to 30 (unit: 0.1%)
[at time of shipment: factory adjustment value/after RAM initialization: 0]
T-15-113
T-15-114
T-15-115
0005-6949
0006-0289
0001-7321