Canon iR C6800 Series Service Manual page 1297

MEMO: Entering the Initianl Reading
Highlight the counter reading [1], and type in the initial reading (from before the replacement work).
[1]
F-15-29
The reading '18,000' (denominator) for [FX UP RL] may be changed, but a change will not affect the stored data,
i.e., it will return to '180,000' when a different page is brought up or the power is turned off and then back on. To
change the stored data (denominator), change the setting in the following service mode item:
COPIER>OPERATION>BODY>FXWRNLVL.
The reading may be changed to any of the following three: 180,000/150,000/120,000.
15.8.1.7.39 <FX LW RL>
for the fix lower roller, indicates the number of sheets that have passed.
Estimated life: 180000 prints
count type: type 2
15.8.1.7.40 <FX IN BS>
for the fixing heat insulating bush, indicates the number of sheets that have passed.
Estimated life: 500000 prints
count type: type 3
15.8.1.7.41 <FX WEB>
for the fixing web, indicates the number of times it has been taken up.
Estimated life: 500000 prints
count type: type 3
Clear in COPIER>COUNTER>MISC>FIX WEB and COPIER>COUNTER>DRBL 1>FX WEB, when webs are
exchanged
15.8.1.7.42 <FX EX RL>
for the external heating roller, indicates the number of sheets that have passed.
Estimated life: 180000 prints
count type: type 2
Chapter 15
0005-7020
0005-7021
0005-7023
0005-7024
15-233