Adjusting Image Position - Canon imageRUNNER ADVANCE C5255 Series Service Manual

Adjusting Image Position

NOTE:
The second side of the 2-sided copy mentioned later means the second side in the
image formation order.
With this equipment, the second side in the image formation order at the time of 2-sided
copy/print is equivalent to the first side of the original.
■ Margin Adjustment (1st side; Mechanical Adjsutment)
1) Make copies using the Cassette 1 and 2, and check that the left edge margin is 2.5+/-
1.5mm.
Feeding direction
of paper
<In Case of Nonstandard>
NOTE:
Adjsutment method is same for both the Cassette 1 and 2.
2) Pull out the cassette.
3) Check the 2 scale positions on the adjusting plates.
9
Installation > Installation Procedure > Adjusting Image Position > Margin Adjustment (1st side; Mechanical Adjsutment)
image
F-9-63
F-9-64
9 Installation > Installation Procedure > Adjusting Image Position > Margin Adjustment (1st side; Mechanical Adjsutment)
4) Loosen the 3 fixing screws.
9-31
F-9-65
9-31