Canon iR C6800 Series Service Manual page 1359

6) When the machine has made a connection and bring up the following screen, click [OK].
Service Support Tool DLM4 (ver.1.81En) Connecting to the Machine
Selected Model and Unit
Model
Connected Model and Unit
Model
List of System Software for the Target of Connection
Language List for the Target of Connection
The information needed for the job has been obtained.
Check the indicated descriptions, and press [OK].
7) Click [Language Download].
Service Support Tool DLM4 (ver.1.81En) Selecting a Job
Connected Model and Unit
Model
List of System Software for the Target of Connection
Language List for the Target of Connection
Selecting a Language Job
Click the job key for Language
Write the Languate to the machine.
iR XXXX Unit
iR XXXX Unit
L a n g u a g e C o u n t r y / R e g i o n
Japanese Japan
L a n g u a g e C o u n t r y / R e g i o n
English
All
iR XXXX Unit
L a n g u a g e C o u n t r y / R e g i o n
J a p a n e s e J a p a n
L a n g u a g e C o u n t r y / R e g i o n
E n g l i s h A l l
Connected to 172.16.1.100
Language
Language
V e r s i o n S t a t e
01.25 A
V e r s i o n S t a t e
01.25 H
OK
F-16-70
Connected to 172.16.1.100
Language
V e r s i o n S t a t e
0 1 . 2 5 A
V e r s i o n S t a t e
0 1 . 2 5
H
Language Download
To Unit Selection Screen
F-16-71
Chapter 16
16-53