Sl Chk - Canon iR C6800 Series Service Manual

Chapter 15
15.5.2.13 <SL CHK>
15.5.2.14 <SL ON>
15.5.2.15 <MTR ON>
15-142
Use it to check the ADF solenoid on its own.
Operation
1) Press [SL CHK] to highlight
2) Enter the number of the component using the keypad.
3) Press the OK key.
4) Press [SL ON] to start checking the operation.
Number of Component
0: lock solenoid
1: stamp solenoid
at time of shipment: factory default
upon RAM initialization: 0
Use it to start the operation of the selected solenoid.
Operation
The operation varies from model to model.
1) Press [SL] to highlight; then, press the OK key to start motor operation.
2) Press the OK key once again to stop the ongoing operation.
(The operation will stop automatically in 5 sec; however, the indication will
not change to [STOP] unless the OK key is pressed once again.)
Use it to start motor operation.
Operation
The operation varies from model to model.
1) Press [MTR ON] to highlight; then, press the OK key to start motor
operation.
2) Press the OK key once again to stop the motor.
(The operation will stop automatically in 5 sec; however, the indication will
not change to [STOP] unless the OK key is pressed once again.)
T-15-241
T-15-242
T-15-243
0006-2526
0006-2532
0006-2527