When Replacing The Fixing Web; Removing The Fixing Motor - Canon iR C6800 Series Service Manual

Chapter 9
9.6.14.5 When Replacing the
Fixing Web
1. After attaching the web, take up its slack so that
there will be no slack when the web unit is fitted in the
fixing assembly.
2. After replacing the web, reset the readings of the
following service mode items:
COPIER>COUNTER>MISC>FIX WEB
COPIER>COUNTER>DRBL 1>FX WEB
9.6.15 Fixing Motor
9.6.15.1 Removing the Fixing
Front Cover
1) Open the font cover.
2) Slide out the fixing/feeding assembly.
3) Open the re reversal delivery cover [1] and the
middle cover [2].
[1]
F-9-204
9-60
0002-9572
0003-7052
[2]
5) Remove the knob [1] and the 2 screws [2]; then,
detach the fixing front cover [3].
[2]
[3] [2]
F-9-205
9.6.15.2 Removing the Fixing
Motor
1) Disconnect the 2 connectors [1], and remove the 3
screws [2]; then, detach the fixing motor [3].
[2]
[1]
F-9-206
[1]
0003-7054
[3]