Canon iR C6800 Series Service Manual page 802

Chapter 11
Unit
Fixing assembly Pressure thermistor
Fixing assembly Outside heating roller
thermistor
Fixing assembly Fixing thermal switch
Fixing assembly Pressure thermal switch
Fixing assembly Outside heating thermal
switch
Fixing assembly Inlet guide
Delivery assembly Upper/lower separation
claw
Waste toner collection Waste toner box
assembly
note:
The black developing cylinder need not be cleaned on a periodical basis. If you must clean the surface of the cylinder,
be sure to dry wipe it with lint free paper, NEVER using water or solvent.
*:
The intervals are based on a color ratio of 10% and image ratio of 5%, and thus are subject to variation depending
on the actual ratios.
The foregoing values are estimates only, and are subject to change based on future data.
11-12
Location Item
clean
replace
clean
replace
clean
replace
clean
replace
clean
replace
clean
clean
inspect
Interval
150,000 prints
500,000 prints
150,000 prints
500,000 prints
300,000 prints
1,000,000 prints
150,000 prints
1,000,000 prints
150,000 prints
1,000,000 prints
150,000 prints use lint free with specified solvent.
150,000 prints use lint free paper with specified solvent.
250,000 images*
Remarks