Drm Disp; User; Copy Lim - Canon iR C6800 Series Service Manual

Hide thumbs Also See for iR C6800 Series:

Table of Contents

15.6.1.1.24 <DRM DISP>

15.6.1.2.1 Overview

Making User Related Settings

15.6.1.2.2 <COPY LIM>

Use it to enable/disable the message for drum phase shifting.

If the E310's photopositive drum is used with its home position unchanged

in relation to the drum shaft, uneven density at drum intervals or lines can

occur in output images.

To limit the symptom, the phase of the photosensitive drum is shifted by

90 deg every specific number of prints. The machine does not shift the

phase on its own, and requires the work of the service person.

When needed, the machine issues a message to prompt the work on the

User screen and the Service Mode screen.

Use this mode item to enable/disable the message.

The new setting will not be valid until the power switch has been turned

off and then back on.

0: disable message

1: indicate only in service mode (default)

2: indicate on both User and Service Mode screens

The message will go off automatically when the following is executed:

COPIER>FUNCTION>MISC P>DR P ADJ.

at time of shipment/upon RAM initialization: 1

To change the number of prints after which the message is indicated for

COPIER>OPTION>BODY>DRM DISP, change the denominator in

COPIER>COUNTER>MISC>DRM PHAS.

Use it to change the upper limit on the copy count.

1 to 9999 (prints)

at time of shipment/upon RAM initialization: 9999

Chapters

Table of Contents