Ohp Sped; Fx Crot - Canon iR C6800 Series Service Manual

Chapter 15
15.6.1.1.22 <OHP SPED>
Attention
Settings
15.6.1.1.23 <FX CROT>
Attention
settings range
15-152
T-15-269
Use it to switch over the cpm for value BK OHT (remedy against
adhesion upon delivery).
The new setting will not be valid until the main power switch has been
turned off and then on.
0: 40 cpm if w/ finisher; 20 cpm if w/o finisher
1: 20 cpm
2: 10 cpm
at time of shipment/upon RAM initialization: 0
T-15-270
Use it to change the intervals at which the fixing roller is rotated idly (remedy
against deformation of the roller).
The fixing roller is rotated idly for 1 sec once every 30 min (default) to prevent
it from suffering deformation while the machine remains in standby.
The new setting will not be valid until the power switch has been turned off
and then on.
0: 30 min
1: 20 min
2: 10 min
3: 5 min
at time of shipment/upon RAM initialization: 0
0005-6695
0005-6696