Canon iR C6800 Series Service Manual page 1243

Hide thumbs Also See for iR C6800 Series:

Table of Contents

Use it to specify how received data should be printed out.

0: normal operation

1: print as is

[at time of shipment/after RAM initialization: 0]

If received images have a fault, use it to isolate the cause between data

itself and image processing.

Use it to increase the black belt in 4C mode.

Use it to prevent photosensitive drum cleaning faults in an N/L environment.

The new setting will not be valid until the power switch has been turned off

and then back on.

0: increase by 100%

1: increase by 150%

2: increase by 20%

at time of shipment/upon RAM initialization: 0

Use it to select face up or face down delivery when multiple sets are specified.

When multiple sets are specified, the machine uses face up delivery. To

ensure a specific level of stacking performance, however, the machine offers

a mode for face down delivery.

(This choice is not valid if a finisher is installed.)

The new setting will not be valid until the power switch has been turned off

and then back on.

0:use face up delivery if no more than 1 original

1:use face up delivery if no more than 1 original, but face down delivery if set

for multiple sets

at time of shipment/upon RAM initialization: 0

Chapters

Table of Contents