Chapter 7
2) Holding the shaft of the idler roller [1], pull the
roller upright to detach.
[2]
[1]
F-7-857
When detaching the roller, take care not to damage
the surface of the ITB by the roller.
7.11.31.11 Removing the ITB
1) Holding the ITB [1] by the edge, pull it straight up
to detach.
[1]
F-7-858
7-232
7.11.31.12
Primary Transfer Roller
1) Shift the locking lever [1] in the direction of the
arrows; then, lift the roller arm [2].
F-7-859
2) Pick the shaft [1] of the primary transfer roller [2],
and detach the roller.
F-7-860
0003-2581
7.11.31.13
When Replacing the Primary
Transfer Roller
As the machine is used more and more, the shavings
from the primary transfer roller can start to collect on
the rollers behind the belt.
When you have replaced the primary transfer roller,
be sure to clean the 6 rollers [1] and the scraper [2]
indicated below.
Removing
the
[2]
[1]
[2]
[1]
Points to Note
0002-6343
0005-9148