Hv Pri - Canon iR C6800 Series Service Manual

<MD OFS K>
Use it to adjust the color balance of the medium density range (black).
range of adjustment: 8 to +8 [at time of shipment/after RAM initialization: 0]
Avoid its use as much as possible if the operation is normal.
<HD OFS Y>
Use it to adjust the color balance for the high density range (yellow).
range of adjustment: 8 to +8 [at time of shipment/after RAM initialization: 0]
Avoid its use as much as possible if the operation is normal.
<HD OFS M>
Use it to adjust the color balance for the high density range (magenta).
range of adjustment: 8 to + 8 [at time of shipment/after RAM initialization: 0]
Avoid its use as much as possible if the operation is normal.
<HD OFS C>
Use it to adjust the color balance for the high density range (cyan).
range of adjustment: 8 to +8 [at time of shipment/after RAM initialization: 0]
Avoid its use as much as possible if the operation is normal.
<HD OFS K>
Use it to adjust the color balance for the high density range (black).
range of adjustment: 8 to +8 [at time of shipment/after RAM initialization: 0]
Avoid its use as much as possible if the operation is normal.

15.4.4.1.5 HV PRI

<GRID 2>
Method of
adjustment
Range of
adjustment
Note
<GRID 3>
T-15-128
Use it to adjust the gain of the primary charging current measurement value.
if you have initialized the RAM on the DC controller PCB or replaced the
DC controller PCB, enter the value indicated on the service label.
if you have recycled the high voltage PCB, enter the value indicated on the
label attached to the PCB.
0 to 00
at time of shipment: factory adjustment value
upon RAM initialization: 498
This item is for use at the factory, and must NOT be used in the field.
Chapter 15
0001-1691
0001-1693
0001-1695
0001-1697
0001-1698
0005-6877
15-97