Canon iR C6800 Series Service Manual page 996

Chapter 14
Cause
# 829
Data that contains more than 1,000 pages is
received.
# 830
A DSN (Delivery Status Notification) error
notification is received because of an incorrect I
fax address or destination setting, or the data size
of the sent documents exceeds the mail server
capacity.
# 831
An I fax document could not be received using
SMTP because of the RX/Print Range setting in IP
Address Settings in TCP/IP Settings in Network
Settings in System Settings (from the Additional
Functions screen).
# 832
DSN (Delivery Status Notification) mail was not
sent because TCP/IP Settings or E mail/I Fax in
Network Settings in System Settings (from the
Additional Functions screen) have not been set, or
trouble has occurred in the mail server.
# 833
MDN (Mail Delivery Notification) mail was not
sent because TCP/IP Settings or E mail/I Fax in
Network Settings in System Settings (from the
Additional Functions screen) have not been set, or
trouble has occurred in the mail server.
# 834
An MDN error notification is received because of
an incorrect I fax address or destination setting, or
trouble has occurred in the network or mail server.
Alternatively, the memory of the receiving
machine is full.
# 835
The maximum number of text lines for receiving
an I fax has been exceeded.
14-12
This machine can print or store up to 999 pages of data in memory, but
will delete any data that exceeds this limit. Ask the sender to resend the
remaining pages.
1. Check the I fax address or destination setting.
2. Set Maximum Data Size for Sending in E mail/I Fax Settings in
Communication Settings in System Settings (from the Additional
Functions screen) so that it is less than the mail server capability.
3. Check the status of the mail server, DNS server, and network.
Reset the RX/Print Range setting in IP Address Settings in TCP/IP
Settings in Network Settings in System Settings (from the Additional
Functions screen).
1. Check the DNS Server Settings and IP Address Settings in TCP/IP
Settings, and E mail/I Fax in Network Settings in System Settings (from
the Additional Functions screen).
2. Check the status of the mail server and DNS server.
1. Check the DNS Server Settings and IP Address Settings in TCP/IP
Settings, and E mail/I Fax in Network Settings in System Settings (from
the Additional Functions screen).
2. Check the status of the mail server and DNS server.
Check the I fax address and destination settings.
Ask the sender to reduce the amount of text data in the body of the
document, and resend the data.
Remedy