Photosensitive Drum Cleaner Edge Scraper - Canon iR C6800 Series Service Manual

5. Be sure to tighten the screws [1] on the cleaning
blade in the order indicated in the figure.
5 4 1
[1]
F-7-423
6. Apply blade lubricant (TKN 0480) along the edge
(shaded; coming into contact with the photosensitive
drum) of the cleaning blade.
F-7-424
When you have replaced the photosensitive drum
cleaning blade, be sure to execute the following
service mode item.
Be sure that you execute service mode immediately
after the control panel screen has appeared after
turning on the main switch. :
COPIER>FUNCTION>MISC P>ITR ROT.
7.11.13 Photosensitive Drum Cleaner
Edge Scraper
7.11.13.1 Removing the Right
Cover (upper)
1) Remove the 2 screws [1], and detach the right cover
(upper) [2].
2 3
0004-1090
[1]
F-7-425
7.11.13.2 Releasing the Front
Cover
1) Open the front cover.
2) While pulling on the grip [1], fully open the manual
feed cover [2] to the front.
[1]
F-7-426
If a side paper deck exists, remove the 2 screws [1]
and the latch plate (front)
[2]
F-7-427
Chapter 7
[2]
0004-1092
[2]
[1]
7-143