Canon iR C6800 Series Service Manual page 1032

Chapter 14
2) Execute HDD formatting (ALL) and download the system software (SYSTEM, LANG, RUI) using the Service
Support Tool.
3) When the execution is over, turn off and then on the main power.
G:
1) Set '1' to the following: COPIER>FUNCTION>SYSTEM>CHK TYPE.
2) Make the following selections, and press the OK key: COPIER>FUNCTION>SYSTEM>HD CLEAR.
3) When the execution is over, turn off and then on the main power.
H:
1) Turn off the main power, and turn on the power while pressing the 1 and 9 keys so that the machine will
automatically start its recovery program* and turns its control panel solid black.
2) When the execution is over (i.e., when the screen is solid white), turn off and then on the main power.
If the machine does not start its recovery program in response to the foregoing operation, go to E.
I:
1) By referring to "Formatting the HDD," enter the appropriate CHK TYPE in the following:
COPIER>FUNCTION>SYSTEM.
2) Make the following selections, and press the OK key.
3) When the execution is over, turn off and then on the main power.
J:
1) Enter '4' to the following: COPIER>FUNCTION>SYSTEM>CHK TYPE.
2) Make the following selections, and press the OK key: COPIER>FUNCTION>SYSTEM>HD CHECK (1 to 5 min).
3) When the execution is over, turn off and then on the main power.
*Takes about 30 to 50 min.
**As necessary, ask the user to collect the address book data, transfer settings, and user mode data before starting
the work.
Formatting the HDD
Partition
DOSDEV
FSTDEV
DOSDEV2
FSTPDEV
DOSDEV3
PDLDEV
DOSDEV4
BOOTDEV
DOSDEV5
not specified
14-48
T-14-70
CHK TYPE Typical data that will be deleted
1 all that relate to images (i.e., reservation, box, fax) mode
memory, routine task button
1
1
1
2 PDL spool
3 PDL related file (front, registration form, ICCProfile)
4 user data (address book, transfer settings); system software
4
5
0