Removing The Patch Image Reading Unit; Removing The Idler Roller - Canon iR C6800 Series Service Manual

7.11.28.8 Removing the Patch
Image Reading Unit
1) Shift the arm [1] shown in the figure to lock it in
place; thus releasing the roller (both front and rear).
[1]
F-7-818
2) Stand the intermediate transfer unit by fitting its 2
pints [2] in the 2 holes of the fixing/feeding assembly.
Make sure that the ITB cleaner unit has been
already removed.
[2]
[1]
F-7-819
3) Disconnect the connector [1], and free the cable [3]
from the 3 cable clamps [2].
4) Remove the 2 screws [4], and detach the patch
image reading unit [5].
0003-9012
[2]
[1]
[4]
[5]
F-7-820
7.11.28.9 Removing the Idler
Roller
1) Remove the screw [1], and detach the pre transfer
guide [2].
[2]
F-7-821
Chapter 7
[3] [1]
[2]
0003-2655
[1]
7-223