7) Remove the screw [2] found at the rear of the fixing
assembly [1].
[1]
[2]
F-9-182
8) Holding the 2 grips [1], detach the fixing assembly
[2].
[2]
[1]
F-9-183
When lifting the fixing assembly, be sure to take
care not to touch the web length detecting arm [1] so
that the arm will be free of damage.
[1]
F-9-184
[1]
9.6.13.2 Removing the Outside
Heating Roller Heater
1) Engage the ends of the 2 springs [1] on the hooks
[2] of the side plate.
[2]
[1]
[1]
F-9-185
2) Disconnect the connector [1], and free the harness
[2] from the 2 wire saddles [3].
[2]
[1]
[3]
F-9-186
Chapter 9
0003-2561
[2]
[1]
9-55