Canon iR C6800 Series Service Manual page 766

Chapter 10
10.5.10.5 Removing the HV1
PCB
1) Open the 3 wire saddles [1], and free the 2 cables
[2].
2) Remove the screw [3].
3) Release the hook [4].
[1]
[2]
F-10-69
4) Disconnect the 2 connectors [1], and free the cable
[3] from the cable guide [2].
5) Release the hook [3], and detach the lid [4].
[2]
[5] [4] [1]
F-10-70
10-32
0003-8715
[4] [3]
[1] [3]
6) Disconnect the 5 connectors [1], and free the cable
from the cable guide [2].
[1]
[1]
F-10-71
7) Remove the 2 screws [1], and lift the HV1 PCB [2]
to detach.
[1]
[2]
F-10-72
[2]
[2]