Chapter 7
5) Remove the screw [1], and shift down the locking
plate [2].
[1]
F-7-340
6) Disconnect the connector [1], and remove the 5
screws [2]; then, detach the transfer cleaner driver
assembly [3].
[2]
[2]
[3]
F-7-341
7.11.11.6
Removing
Intermediate Transfer Unit
1) Disconnect the 2 connectors [1].
[1]
F-7-342
7-126
[2]
[1]
[2]
the
0006-0065
2) Fully slide out the fixing/feeding assembly.
3) Slide out the intermediate transfer assembly [1] to
the front; when it stops, shift it slightly to the upper
right and then slide it farther out to detach.
Do not touch the surface of the ITB. Also, be sure
to slide the intermediate transfer assembly straight out
so as to prevent damage to the surface of the ITB.
F-7-343
7.11.11.7 Cleaning the Surface
of the Intermediate Transfer
Unit
1) Place the ITB unit [1] on paper for protection.
[1]
F-7-344
[1]
0006-0336