Canon iR C6800 Series Service Manual page 1173

Hide thumbs Also See for iR C6800 Series:

Table of Contents

15.5.1.1.5 <STIR C>

15.5.1.1.6 <SPLY H Y>

15.5.1.1.7 <SPLY H M>

15.5.1.1.8 <SPLY H C>

15.5.1.1.9 <CARD>

Method of operation

Use it to stir the toner inside the developing unit (C).

Select the item to highlight, and press the OK key to start operation.

Use it to start initial supply of toner from the toner cartridge (Y) to

the toner buffer assembly.

Select the item to highlight, and press the OK key to start operation.

Use it to start initial supply of toner from the toner cartridge (M) to the

toner buffer assembly.

Select the item to highlight, and press the OK key to start operation.

Use it to start initial supply of toner from the toner cartridge (C) to the

toner buffer assembly.

Select the item to highlight, and press the OK key to start operation.

Use it to set up a card reader.

1 to 200 (at time of shipment/upon RAM initialization: 0)

Enter a number for the cards, and press the OK key. (As many as 100 cards

each given a number starting with the one you entered will be enabled for use.)

At this time, the card control information (group ID and ID No.) is initialized.

Chapters

Table of Contents